DOS Command Reference 1

Some course material on the Teaching Network may still use

the command line operating system called DOS (Disk

Operating System). This requires the user to type specific

commands at a prompt.

You may also need to use this system, for example, when

changing your password, and you can enter DOS by choosing

'MS-DOS Prompt' from the Public menu on the taskbar.

Commands can be typed in response to the network DOS

prompt:

G:\>

Commands may be typed in upper or lower case. Here, they

are specified in upper case to distinguish them from other

input.

Commands have a particular format. Some can be used

simply by typing the command name only, as in:

DIR

which displays a listing of files in the current directory.

Many commands can take extra information called

parameters to make them more specific, For example, the

COPY

copied and a parameter specifying a file to which the copy is to

be made. So the command would look like this:

command can have a parameter specifying a file to be

COPY

filea fileb

In this case,

and

Parameters can sometimes be omitted in which case a default

action will apply.

Commands can also be qualified by the use of options. Options

are preceded by a / sign. A simple example of the use of an

option is with the

filea would be the name of a file to copy fromfileb would be the name of a file to copy to.DIR command. DIR can be qualified by /P or

/W

. Thus the commands:

DIR

DIR /W

DIR /P

result in listings presented in a different format as detailed

later.

DOS Command Reference

Introduction

Command Format

Parameters

Options

2 DOS Command Reference

Some Useful DOS Commands

Make a copy of a file or merge files together.

COPY

original-file destination-file

where

names, separated by a space.

The command can be used to merge several files into one file

since the

filenames separated by the + symbol. For example:

original-file and destination-file are fileoriginal-file parameter can be a list of

COPY file1 + file2 file3

would copy file1 and file2 into file3.

Note that the file names used in the copy command

must

include the file extension if it exists. So if you were copying a

fortran program called

need to include the .

Delete a file.

first.for, for example, you wouldfor extension in the filename.

DEL

filename

where

asked to confirm that you really want to delete the file. Note

that the name must include the file extension.

The amount of space on a disk is limited and it is necessary

periodically to tidy up unwanted files. It is possible to use a '*'

character in a filename to match any sequence of characters.

This feature is very useful when deleting unwanted files with

identical extensions. For example, when developing

programs,

filename is the name of the file to be deleted. You are

DEL *.obj

will delete every binary (.

Since an

source program, it is usually unnecessary to keep it.

Obtain a list of the files stored in a directory.

If used without options this command will give a list of files in

the current directory, including any extension (e.g. .

their size.

If used with the option /P, that is:

obj) file in the current directory..obj file can always be recreated from the originalfor), and

DIR /P

The same information will be displayed page by page with the

message:

strike a key when ready

at the end of each page.

COPY

DEL

DIR

DOS Command Reference 3

If it is used with the /W option, i.e.

DIR /W

the listing is of names and extensions only and in a more

compact format across the page.

Take a security copy of your working disk.

It is very important to have a second copy of your programs

and data in case you lose your disk or it becomes unreadable

for some reason. Use the DISKCOPY command as follows:

DISKCOPY A: A:

where

a copy of your disk is generated in the computer's memory, the

computer tells you to remove the first or source disk and insert

the disk, which is to become the copy (the target disk).

Insert the target disk and press

not formatted it will be formatted automatically. The source

disk should be write protected using the tab in the corner in

case you mistake it for the target disk (see the chapter on

using disks).

Obtain a printed listing of a file.

A: denotes the drive the disks will be loaded into. WhenENTER. If the second disk is

LIST

filename

where

or if you don't need a printed copy, you can use the

filename is the file to be printed. If the printer is busy,TYPE

command to view a file on the screen.

You could also use an editor such as DOS Edit to display a file,

in which case, as a bonus, you would then be in a position to

correct any errors you might notice. Remember that the file

name must include the file extension. So if you want to print

your Pascal program called

first you would need to use:

LIST first.pas

Change the name of a file. This command can be abbreviated

to REN:

REN

oldname newname

where

name it is to be given.

Note that files on drives other than the current drive can be

referred to by prefixing the filename by the relevant drive

letter, for example:

oldname is the file to be renamed and newname is the

A:\

filename

where the \ refers to the ‘root’ directory of the drive.

DISKCOPY

LIST

RENAME

4 DOS Command Reference

Filenames can also include directories separated by the \

character as in:

A:\

dir1\dir2\filename

View a file on the screen.

TYPE

filename

where filename is the name of the file to be displayed on the

monitor screen. If you are looking at a long file, you will need

to press the

space bar to continue scrolling when you have read the screen.

To format a floppy disk, place the disk in the floppy drive and

type:

PAUSE key to stop continuous scrolling. Press the

FORMAT A:

Note that by default the disk will be formatted to hold about 1.44

megabytes of data.

Warning: formatting will destroy any data on the disk so only

do this once!

DOS Command Listing

In the following section, alternative options are separated by

the ‘!’ character. Arguments are optional unless in italics.

‘cwd’ stands for ‘Current Working Directory’.

DOS commands are not case sensitive. Some commands have

switches; these must be preceded by a forward slash (/).

Pathnames may be preceded by a drive letter as in

‘X:pathname’ and if no drive or pathname is given the current

directory is assumed.

ATTRIB +!-r +!-a

pathname

display, or set!clear Read-only or

Archive attribute

BREAK on!off

display, or turn on!off increased level of ^C detection

CHDIR (CD) path

display, or change working directory

CHKDSK pathname (A: drive only)

check disk or file logical structure

/f - fixproblems encountered

/v - verbose; displays filespecs

CLS

clear screen

TYPE

FORMAT

DOS Conventions

The Commands

DOS Command Reference 5

COMMAND path cttydev

run nested CLI from path with I/O device cttydev

/e:# - set environment size #

/p - do not invoke another CLI

/c command - run command and then enter

COPY pathname pathname

or

COPY

pathname + pathname

copy or concatenate files

/v - verify writes

/a!b - preceding and all subsequent files are ascii!

binary (* filenames in source(s) and target are matched

one-to-one.)

CTTY device

change MS-DOS I/O device

DATE dd-mm-yy

display and/or set date (numerical country-dependent

format)

DEL ! ERASE

pathname

delete file(s) - prompts if pathname is *.*

DIR pathname

display directory - filename and/or ext default to *

/p - paginate

/w - multi-column

DISKCOPY drive: drive:

copy disk sector-by-sector rather than file-by-file

EXIT

exit nested CLI

FIND “

find and display lines containing string in file

/v - lines NOT containing string

/c - count lines only

/n - display line numbers also

FORMAT

/1 - single sided

/4 - use double rather than high density (40 tracks)

/8 - use 8 sectors of each track

/n:xx - specifies xx sectors per track

/t:yy - specifies yy tracks

/v - prompt for volume label, up to 11 characters

/f:720 - format at 720 kb

LABEL drive: label (A: drive only)

display, or edit volume label - 11 characters excluding

most specials

MKDIR (MD) path

make directory

string” pathnamedrive: (A: drive only)

6 DOS Command Reference

MODE

interactively configure various options

MORE

paginates screen output

e.g. type filename | more

PATH path;path;...

display or set command search path(s) to be used after

cwd

PATH;

resets default to cwd only

PROMPT string

reset or set prompt.

Characters (each prefixed by $) mean:

$=$, t=time, d=date, p=cwd, v=version, n=drive,

g=>, l=<, b=!, _=CRLF, s=leading space, e=ESC (for

ANSI driver)

RENAME (REN)

pathname pathname

rename file(s) within a drive - wildcards are matched

one-to-one

RMDIR (RD) path

remove empty directory

SET variable=text

display all, set or clear MS-DOS variable - accessed as

%variable%

SHARE

enable networked multi-access file locking

/f:nbytes - nbytes per file, need about 20 bytes per file,

default 2048

/l:nlocks - nlocks per file, default 20

SORT pathname pathname

sort lines of file alphabetically, ignoring case, to file or

stdout; reads stdin by default

/r - reverse order

/+n - on n’th character in each line, default is first

SUBST drive: path (A: drive only)

display substitutions, or substitute path by virtual drive

SYS

copy hidden MS-DOS .

TIME hours:minutes

display and/or set time using 24-hour format

TYPE

drive: (A: drive only)sys files from default drivepathname

output contents of a file, with tab spacing of 8

VER

display MS-DOS version

DOS Command Reference 7

VERIFY on!off

display, or set!clear disk write verification

VOL drive:

display disk volume label

XCOPY

copy directory tree

/a!m - if archive bit set ! also clears in source

/d:date- modified on or after date only

/s!e - copy subdirectories if not empty ! even if empty

/p - prompt

/v - verify

/w - wait for keypress

If renamed to MCOPY it determines automatically whether

target is file or directory.

Full details of all DOS commands can be seen by following the

command with the switch /? For example,

DIR /?

gives a listing of all DIR options.

DOS commands are stored in a template and previous

commands can be recalled, character by character enabling

editing as required.

The template is accessed by the following keys:-

F1 - get next character from template

F2 C - get characters up to but excluding character C

F3 - get remaining characters from template

del - skip one character in template

F4 C - skip characters up to but excluding character C

pathname pathname

ESC

- clear command line

INS

F5 - copy command to template for re-editing

F6 - put ^Z in new template

The arrow keys may also be used to recall the previous

command.

All DOS commands may be used in batch files. Additionally,

the following commands are useful for more advanced batch

processes.

Arguments for batch files are accessed as ‘%1’ to ‘%9’.

ECHO on!off!message

display echo status, turn echoing on!off (default on)

or display message

FOR %%C IN (SET of items) DO command

C is any character other than 0-9, SET is e.g. list of files

- toggle overwriting of template

On-Line Command Help

Command Editing

Batch File

Commands

8 DOS Command Reference

GOTO LABEL

LABEL is any line of text, usually preceded by colon (:)

in first column, which makes MS-DOS ignore it other

than as a label. Terminates if label not found

IF ERRORLEVEL

number command

command executed if previous command returned exit

code >= number

IF

command executed if strings match

may be negated by NOT before condition

IF EXIST

string1 == string2 commandfilename command

command executed if file exists

may be negated by NOT before condition

PAUSE comment

comment displayed only if echo on

REM comment

remark - ignored by MS-DOS

SHIFT

shift arguments - allows access to more than 9

Several special characters may be used when referring to

directories and files:

\ = root directory or a directory separator

. = current directory

.. = parent directory

Wildcard characters may be used in filenames or extensions:

? = any character

* = any tail or extension

X: - switches to current working directory (cwd) on

drive X.

The FC command enables comparison of two files:

FC

pathname1 pathname2

compare two files, or two wildcarded sets of files

/a - abbreviate output of ASCII comparison

/b - force binary comparison (byte-by-byte)

/c - ignore case

/L - force ASCII comparison (line-by-line)

/Lb# - use line buffer of # lines

/n - display line numbers in ASCII mode

/t - do not expand tabs - default expands to spacing

of 8

/w - compress white space (tabs and spaces) to

single space (leading or trailing white space

always ignored)

/# - # lines must match to re-synchronize else

regarded different (default is 2)

Special Characters

File Comparison Utility

DOS Command Reference 9

I/O Control

DOS input and output may be controlled by the following

control key sequences. (^ = the

^C - abort current command

^H - destructive backspace

^J - linefeed - physical newline to input long lines

^N - toggle copying of terminal output to printer

^P - toggle redirection of terminal output to printer

^S - suspend/restart terminal output

^X - cancel current line, and output \-CR-LF

^Z - end of file

Input and output from commands or programs can be

redirected by using the following symbols:

> send output to...

>> append output to...

< take input from...

| pipe output to next input

For example:

pipe output from command a to input of command b:

command a | command b

send a directory listing to file filename:

DIR > filename

DOS includes a full-screen editor invoked by the EDIT

command (with or without a filename). To use this editor type:

EDIT (

The editor provides pull-down menus, operated by the

keyboard or mouse, and a help facility. Note that any changes

made to a file overwrites the original, no backup is created.

CTRL key).filename)

I/O Redirection

Using The

DOS Editor